Air Conditioning Installation Parts
Condensate Accessories
Line Sets
HVAC Controls
All products
ICM441 3 Phase Motor Protection
$156.69each
Description
Protects Against
- Under voltage
- Over temperature
- Power interruptions
- Rapid short cycling
- Shorted temperature sensor
- Open temperature sensor
- Control duty, SPST relay layout
- Anti-short cycle time delay, 4 minutes (nominal)
- 1 second manual bypass
Mode of Operation – The ICM441 is designed to individually monitor 3 PTC temperature sensors which are wound into each phase winding of a motor. If any winding or incoming line power is beyond the safe operating range of the motor, the ICM441 will lock the motor out of operation until the inputs fall back into the safe operating range. The ICM441 can sense shorted or open sensors, in addition to providing isolation to each sensor to prevent damage to the monitor in the event a sensor shorts to a winding or case ground.
4 in stock
Fast Shipping
Carrier information
20k products
Payment methods
24/7 Support
Unlimited help desk
2-day Delivery
Track or off orders
| Product Highlights |
Voltage: 120 or 208/240 VAC |
|---|---|
| Specs |
Frequency: 50-60 Hz – 50-60 Hz ,Voltage: 120 or 208/240 VAC ,Output: SPDT (relay) – 6 amps resistive (N.O.) ,Dimensions: 3.25" x 3" x 1.25" |
| Brand |
ICM Controls |
Description
Related products
Eaton Freedom NEMA Solid State On Delay Timer, 1-30 Sec, 120V, 50/60 Hz, Side Mount
In stock
FS1500L Frost Sentry Garage Thermostat (Horizontal)
In stock
| Product Highlights |
Stages: 1 Heat ,Voltage: 24 VAC (18/30 VAC) ,Amperage: 1 amp max. per terminal, 2 amp max. total load Amps ,Power Method: Battery ,Mount: Horizontal ,Size: 3.75" |
|---|---|
| Specs |
Product Type: Garage Thermostat ,Application: Heating ,Stages: 1 Heat ,Voltage: 24 VAC (18/30 VAC) ,Amperage: 1 amp max. per terminal – 2 amp max. total load ,Temperature Control Range: 35°F to 75°F ,Accuracy: +/- 1°F ,Power Method: Battery ,Mount: Horizontal ,Height: 3.75" ,Width: 4.59" ,Depth (Inches): 1.12" |
| Brand |
ICM Controls |
ICM203 Delay on Break Timer (.03-10 Minute Knob Adjust. Delay)
In stock
| Product Highlights |
Voltage : 18/30 VAC ,Amperage : 1.5 Amps ,Size : 2" x 2" |
|---|---|
| Specs |
Time Delay: 3-10 Min Adjustable ,Voltage: 18/30 VAC ,Amp Inrush: 15 ,Holding Current: 40 mA (minimum) ,Replaces: EAC-426-ADJ – TD74 ,Product Type: Delay on Break ,Amperage: 1.5 ,Frequency: 50-60 Hz ,Size: 2" x 2" ,OEM: Supco – A-1 |
| Brand |
ICM Controls |
Reviews
Clear filtersThere are no reviews yet.